View LM6-THR1-3B-N1_1265921.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Cree(R) SMD LED
Model # LM6-THR-3B-N Data Sheet
120-degree, 3.3 x 3.5-mm, SMT LED in red color with water-transparent lens and black coated surface
Applications
* * * * Indoor and Outdoor Displays Backlighting Coupling into Light Guides RGB Full-Color Displays
Absolute Maximum Ratings (TA = 25C)
Absolute Maximum Rating R Forward Current
Note 1
Items
Symbol IF
Note 2
Unit mA mA V mW C C C C/W C/W C/W C/W
3 x 50 3 x 200 5 3 x 160 -40 ~ +100 -40 ~ +100 110 450 650 300 450
Peak Forward Current Reverse Voltage Power Dissipation
IFP VR PD Topr Tstg TJ
Note 3
Operation Temperature Storage Temperature Junction Temperature Junction/ambient 1 chip on
RTHJA RTHJA RTHJS RTHJS
Junction/ambient 3 chips on
Note 3
Junction/solder point 1 chip on Junction/solder point 3 chips on
1. 2. 3.
Notes:
Single-color light. Pulse width 0.1 msec, duty 1/10. RTH test condition: mounted on PC Board FR 4 (pad size 16 mm2)
D-CT180.000 Data Sheet: CL
Typical Electrical & Optical Characteristics (TA = 25C)
Characteristics Dominant Wavelength Viewing Angle at 50% Forward Voltage Luminous Intensity Reverse Current (max) Condition IF = 3 x 20 mA IF = 3 x 20 mA IF = 3 x 20 mA IF = 3 x 20 mA VR = 5 V Symbol DOM 21/2 VF IV IR 710 Minimum 621 Typical 628 120 2.5 1100 10 3.2 Maximum 636 Unit nm deg V mcd A
Subject to change without notice. www.cree.com/ledlamps
Standard Bins for LM6-THR-3B-N (IF = 3 x 20 mA)
Lamps are sorted to luminous intensity (IV) and dominant wavelength (D) bins shown. Orders for LM6-THR1-3B-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (D) values shown and specified are at IF = 3 x 20 mA.
Luminous Intensity (IV)
1800 mcd
X1 or above W2
1400 mcd W1 1120 mcd V2 900 mcd V1 710 mcd 621 nm 636 nm Dominant Wavelength (WD)
Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is 10%. 3. Tolerance of measurement of the dominant wavelength is 1 nm. 4. Tolerance of measurement of VF is 0.05 V. 5. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 6. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 7. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT80.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Graphs
Graphs
100.0 80.0 60.0 40.0 20.0 0.0 2.2 2.6 2.8 3.0 3.2 2.4 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vf(V) If (mA) Vr(V) -60 -50
Document No. Rev. No.
SPE/LM6-THR1-03-N1 03
-40
-30
-20
-10 0.0 -10.0 -20.0 -30.0 -40.0
Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power WL=23nm Domi WL= 628nm 100% 75% 50% If(mA) 25% 0% 400
-50.0
RELATIVE LUMINOUS INTENSITY
5.0 4.0 3.0 2.0 1.0 0.0 0.0 20.0 40.0 60.0 80.0 100.0
FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT
WL(nm) 500 600 700 800 900 FIG.4 RELATIVE INTENSITY VS.
WAVE LENGTH. 50% Power Angle :
0
100 80 60 40 20 0
IF(mA)
Ie(%)
100% 80% 60% 40%
1 CHIP ON
3 CHIP ON 0 20 40 60 80
20%
T ( C) 100
-90
-60
-30
0
30
60
90
0%
FIG.5 MAXIMUM FORWARD DC CURRENT VS SOLDER POINT TEMPERATURE
IF(mA)
FIG.6 FAR FIELD PATTERN.
100 80 60 40 20 0
1 CHIP ON
3 CHIP ON 0 20 40 60 80
T ( C) 100
FIG.7 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE
Items Prepared by Checked by Approved by FCN#
Signatures
WangFJ XieJH DavidLiu
Date
2007-04-06 2007-04-06 2007-04-06 Rev.No 02 03 Date
Revision History
Change Description
2007-03-27 Release. 2007-04-06 Delete WD rank
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
FCN20070101
Data is subject to change without prior notice ; please refer to COTCO Website for the latest version. 3 CLD-CT80.000 Copyright@2002 Cotco International Ltd.
splays Mechanical Dimensions des ys gs at Ta = 25C
Symbol IF IFP VR PD Topr Tstg Tj Rth JA Rth JA n n Rth JS Rth JS
3
Document No. Rev. No. Dimension Draw ing
SPE/LM6-THR1-03-N1 03
All dimensions are in mm.
Absolute maximum Rating 3X50 3X200 5 3X160 -40~+100 -40~+100 +110 450 650 300 450
Unit mA mA V mW
C C C C/W C/W C/W C/W
<=1/10* Rth test condition: Mounted on PC Board FR 4(pad size>=16mm2)
al Characteristics(Ta = 25C)
Symbol Condition IF=3X20mA IF=3X20mA Min. Typ. Max. Unit nm Deg. V
dom
21/2
Notes
621 ----
628 120 2.5
636 --3.2
RoHS Compliance VF IF=3X20mA
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwiseIF=3 X 20mAmaterials in this product are below the -restricted maximum concentration values (also referred to as the Iv 710 1100 mcd threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direcof Itive 2002/95/EC on the restriction of the use--- certain hazardous substances in electrical and electronic equipment VR=5V --10 A R (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
CLD-CT80.000
2/4
Format #: COTCO-D-074
REV.4
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Standard/Custom
0: Standard C: Custom
VF
0: Full forward voltage distribution 1~9, A~Z . . . : special request *
Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV
1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request *
Packing type Product P/N
0: Standard = tape pack 1~9, A~Z . . . : special request *
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number LM6-THR1-3B-N1-00001 Description SMD 120 High Red 628nm, FULL RANK, Tape & Reel
* Please contact your Cree representative about the availability of non-standard kits.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT80.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps

▲Up To Search▲

Price & Availability of LM6-THR1-3B-N1

	To Download LM6-THR1-3B-N1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .